Evaluation of open-face maxillary complete denture for patients with prominent premaxilla: a crossover study.

BACKGROUND: The establishment of good facial esthetics is one of the main objectives of complete denture construction. Unfortunately, it may be the caused issue for patients having a prominent premaxilla due to excessive lip support by the labial flange of the maxillary denture. Open-face dentures (OFD) may suggest suitable prosthetic management for these patients. However, clinical evidence regarding the efficiency of OFD is scarce. METHODS: A total of 38 completely edentulous participants having prominent premaxilla and skeletal class I Angle's classification were enrolled in this study. Each participant received a mandibular complete denture and 2 opposing maxillary dentures; conventional (CD) and open-face (OFD). On the day of denture insertion, the participants were divided into 2 groups; CD-OFD and OFD-CD where CD-OFD group was instructed to use the mandibular denture and the maxillary CD for 3 months and then to use the maxillary OFD for another 3 months after a wash-out period of 2 weeks. While group OFD-CD was instructed to use the mandibular denture and the maxillary OFD for 3 months then to use the maxillary CD for another 3 months after a wash-out period of 2 weeks. The dislodging force of the maxillary dentures was evaluated using the universal testing machine and the patient perception of retention, esthetics, and comfort was evaluated using the Visual Analogue Scale (VAS). Evaluation was carried out 1 day, 1 month, and 3 months after denture insertion. The Student t-test was used to compare the 2 maxillary dentures and the intervals for each denture were compared by using the ANOVA test with repeated measures followed by a Post Hoc test (adjusted Bonferroni) for pairwise comparison. RESULTS: The significance of the obtained results was judged at the 5% level (P value). The dislodging force and patient perception of retention did not show significant differences between the 2 dentures, while the perception of esthetics showed significant differences throughout the follow-up period. Perception of comfort showed an insignificant difference only at the 3-month interval. CONCLUSIONS: Open-face maxillary dentures can be a suitable alternative for patients with prominent premaxilla to achieve satisfactory retention, aesthetics, and comfort.

Complete denture rehabilitation for a patient with Parkinson's disease using clinical strategies: A case report.

OBJECTIVE: To present clinical strategies for prosthetic rehabilitation with complete dentures (CDs) of a Parkinson's disease patient. CASE REPORT: An 82-year-old patient sought the Department of Dentistry at UFRN, reporting retention dissatisfaction and hamper to the mandibular CD adaptation. Patient-reported a dry mouth sensation, and exhibited disordered mandibular movements, tremors, and resorbed mandibular ridge. Aiming retention and stability, double molding with zinc enolic oxide impression paste, neutral zone technique, and non-anatomic teeth were proposed as clinical strategies. At delivery, identification and relief in the supercompression areas were performed to facilitate the acceptance and use of the new dentures. CONCLUSION: The strategies promoted patient satisfaction regarding retention, stability, and comfort. This treatment may be considered for the rehabilitation of Parkinson's disease patients, favoring the adaptation process.

Digital workflow for monolithic and veneered zirconia and metal-ceramic posterior fixed partial dentures: A five-year prospective randomized clinical trial.

Purpose To evaluate and compare the survival, success rates, and biological and technical complications of three-unit posterior monolithic and veneered zirconia and metal-ceramic (MC) posterior fixed partial dentures (FPDs) fabricated using a digital workflow and computer-aided design and computer-aided manufacturing (CAD/CAM) over a 5-year follow-up.Methods Ninety patients in need of three-unit posterior FPDs were randomized to receive monolithic zirconia (MZ), veneered zirconia (VZ), and MC restorations (n = 30 each). Teeth preparations were scanned using an intraoral scanner, and restorations were milled and cemented with resin cement. Clinical performance and periodontal parameters were assessed at baseline and yearly up to 5 years after insertion. Data analysis was performed using the Kaplan-Meier method, Friedman test, and Wilcoxon signed-rank test with Bonferroni correction and Mann-Whitney U test.Results The 5-year survival rates of the MZ, VZ, and MC FPDs were 87%, 97%, and 100%, respectively (P = 0.04). Most complications were biological in nature. Only one MZ FPD fractured 58 months after placement. All the restorations were assessed as satisfactory at each recall. Differences were found in the gingival index score over time in the VZ and MC groups. The margin index remained stable throughout the follow-up period in both zirconia groups.Conclusions The results of this study suggest that using a digital workflow to fabricate posterior FPDs is an adequate treatment option and that monolithic zirconia could be a viable alternative to metal-ceramic or veneered zirconia. However, further long-term studies are necessary to provide stronger evidence in patients with bruxism.

The cantilever contact-point resin bonded bridge; adhesion 2.0.

AIM: When young patients are congenitally missing anterior teeth, different treatment modalities can be used to complement the dental arch. This article proposes a new treatment modality for the replacement of anterior teeth, the cantilever contact-point resin bonded bridge (CCP-RBB). MATERIALS AND METHODS: In this proof of principle study, CCP-RBB's delivered by one operator were clinically assessed. Patients who were missing maxillary incisors and had suitable intra-oral conditions for a contact-point cantilever RBB were included. Three cases are presented to describe all adhesive steps. This proof of principle clinical study is presented with up to 60 months follow-up of the cantilever contact resin bonded bridges. RESULTS: A total of 19 CCP-RBB's were evaluated after a mean period of 29.8 months. None of the restorations exhibited failure, carious lesions or fractures during the follow-up periods, demonstrating an absence of restoration debonding or the need for repair. CONCLUSION: The new cantilever contact-point resin bonded bridge exhibited an excellent treatment modality without failure or debonding up to 5 years. More and extended duration in vivo studies are needed to evaluate this new treatment modality. CLINICAL SIGNIFICANCE: In this proof of principle the new cantilever contact-point resin bonded bridge obtained excellent results up to 5 years of clinical follow-up.

[Long-term clinical evaluation of different types of resin-bonded fixed partial denture to replace lost anterior teeth].

Objective: To evaluate the clinical survival rates and influence factors of different types of resin-bonded fixed partial dentures (RBFPD) used in anterior missing teeth restoration. Methods: Ninety-three RBFPD were delivered to 92 patients [92 patients,43 males and 49 females, average age (46.1±12.8) years] who visited Peking University School and Hospital of Stomatology from January 2006 to December 2021 for restoration of 1 or 2 anterior missing teeth. Altogether 32 cases of glass fiber reinforced RBFPD, 39 cases of glass-based ceramic RBFPD and 22 cases of porcelain-fused-to-metal RBFPD were retrospectively analyzed. The complete survival rate, functional survival rate, patients' satisfaction and color matching of the restorations were recorded and evaluated every year since the replacement with RBFPD. The Kaplan-Meier survival curve method was used for survival analysis, and the Log-rank analysis was used to compare the effect of the number of missing teeth, position (maxillary or mandibular), cantilever or non-cantilever and gender on the survival rate of the restorations. Results: The overall survival time for the 93 RBFPD was 13.7 years (95%CI: 12.3-15.1 years). There was a decreasing trend in complete survival and functional survival for all three material RBFPD from year to year, but complete and functional survival rates exceeded 90% at year 5 and exceeded 80% at year 10. The complete survival rate of the glass-ceramic RBFPD was higher than the other two during the follow-up period, with a complete survival rate of 90% (35/39) at year 15. The porcelain-fused-to-metal RBFPD had a higher functional survival rate in years 1-8, but the complete and functional survival rates showed a substantial decrease after year 9. The single-factor Log-rank analysis showed that the success rate of porcelain-fused-to-metal RBFPD was significantly higher than that of glass fiber reinforced RBFPD (χ²=7.33, P=0.007), and the success rate of RBFPD with 1 missing tooth restored was significantly higher than that of RBFPD with 2 missing teeth restored (χ²=3.23, P=0.072). The differences in success rates between different restoration positions (maxillary and mandibular), cantilever or non-cantilever, and gender factors were not statistically significant (χ²=2.26, P=0.133; χ²=0.68, P=0.411; χ²=1.07, P=0.300). Conclusions: For the restoration of individual missing anterior teeth, both porcelain-fused-to-metal RBFPD and glass-based ceramic RBFPD achieve a high long-term clinical success rate, with glass-based ceramic RBFPD being more able to ensure long-term restorative result.

[Maxillomandibular relationship recording in removable partial petal dentures (RPMD)]. / Enregistrement du rapport maxillo-mandibulaire en prothèse amovible partielle métallique (PAPM).

The recording of the maxillo-mandibular relationship (MMR) is an essential and unavoidable step that occurs at different stages of treatment during a prosthetic rehabilitation. Tissue duality is a major problem in metal partial dentures (MPD), especially in complete and large edentulisms, and is responsible for occlusal inaccuracies resulting in restorations that are not integrated with the patient's manducatory system. In order to perform this step, the practitioner must choose the right material, make the appropriate support, and adopt a reliable and reproducible technique that is adapted to the clinical situation and the prosthetic step. The objective of this work is to suggest a simple and codified approach, which guarantees a reliable recording of the maxillo-mandibular relationship, adapted to the particularities of the supporting structures and taking into consideration the clinical sequence for an optimal occlusal-functional integration of the future metallic partial denture.

Practical advice for successful clinical treatment with resin-bonded bridges.

Resin-bonded bridges are one of the main options for replacing missing teeth for hypodontia patients. This technique offers several advantages for these patients, who are often young, have unrestored abutment teeth, and have had tooth positions optimised by orthodontic treatment. However, the replacement of missing teeth can be challenging due to tooth positions and anomalies of abutment tooth shape and size.These patients are often young adults at the time of restoration, making the minimally invasive nature and predictable long-term success of resin-bonded bridges advantageous over other treatment methods.This paper in the hypodontia themed issue discusses the importance of case selection and gives practical advice for the design and provision of resin-bonded bridges.

Postinsertion adjustment appointments and their association with cast removable partial denture survival.

STATEMENT OF PROBLEM: Successful outcomes with cast removable partial dentures (RPDs) are dependent on adequate fabrication and adjustments at the delivery appointment. Evaluation of the number and frequency of postinsertion follow-up appointments helps determine whether the prosthesis continues to fit comfortably and whether function and esthetics continue to be satisfactory. Reports on the number of appointments and frequency and type of adjustments required for RPDs following insertion are sparse. PURPOSE: The purpose of this university-based population study was to determine the number of appointments and type of adjustments following RPD insertion and their association with patient demographics, type of RPD, and denture survival. MATERIAL AND METHODS: This retrospective clinical study examined the records of 257 patients at the University of Toronto, Faculty Dentistry, wearing 308 RPDs inserted between 2013 and 2014 with a 5-year follow-up. The outcome measures investigated included postinsertion appointments, type of adjustments, and denture survival. RESULTS: A total of 48.1% of the dentures (19.5% tissue supported; and 28.6% tooth supported) were maxillary, and 51.9% (34.7% tissue supported; and 17.2% tooth supported) mandibular. Most patients (68.9%) had 1 to 3 postinsertion appointments, with 78.6% having no major adjustments. Twenty-six dentures failed (failure rate 8.4%), with the failure-free time estimated at 4.58 years (95% confidence interval (CI) 4.42-4.73 years, Kaplan-Meier survival analysis). Failed dentures were significantly associated with more minor adjustments (Mean (M)=4.12, SD=3.90, Kruskal-Wallis (K-W) P=.027; OR=1.18; 95% CI 1.05-1.32, P=.006). More minor adjustments were needed for mandibular dentures (multivariable Poisson regression (MPR) P=.003) compared with maxillary dentures. More major adjustments were needed for maxillary dentures (MPR P=.030) compared with mandibular dentures. More minor and major adjustments were needed for dentures that were remade from within 5 years to beyond 10 years compared with first time denture wearers (MPR P<.001). Patients with musculoskeletal disorders required a significantly higher number of minor adjustments (M=3.67, MPR P<.001) and appointments (M=3.87, MPR P<.001) than those without these disorders. CONCLUSIONS: The 5-year survival of RPDs following insertion was estimated at 91.6%. Most patients required 1 to 3 appointments after insertion. Mandibular RPDs required significantly more minor adjustments, and maxillary RPDs more major adjustments. More minor and major adjustments were needed for dentures that were remade at any time previously compared with first time denture wearers.

TranSDFNet: Transformer-Based Truncated Signed Distance Fields for the Shape Design of Removable Partial Denture Clasps.

The ever-growing aging population has led to an increasing need for removable partial dentures (RPDs) since they are typically the least expensive treatment options for partial edentulism. However, the digital design of RPDs remains challenging for dental technicians due to the variety of partially edentulous scenarios and complex combinations of denture components. To accelerate the design of RPDs, we propose a U-shape network incorporated with Transformer blocks to automatically generate RPD clasps, one of the most frequently used RPD components. Unlike existing dental restoration design algorithms, we introduce the voxel-based truncated signed distance field (TSDF) as an intermediate representation, which reduces the sensitivity of the network to resolution and contributes to more smooth reconstruction. Besides, a selective insertion scheme is proposed for solving the memory issue caused by Transformer blocks and enables the algorithm to work well in scenarios with insufficient data. We further design two weighted loss functions to filter out the noisy signals generated from the zero-gradient areas in TSDF. Ablation and comparison studies demonstrate that our algorithm outperforms state-of-the-art reconstruction methods by a large margin and can serve as an intelligent auxiliary in denture design.

Audit to assess the quality of 916 prosthetic prescriptions of removable partial dentures.

OBJECTIVES: The objectives of this study were to assess the quality of prosthetic prescriptions of removable partial dentures (RPDs) and to analyze the current situation of the communication and information delivery between clinicians and technicians. METHODS: All RPD prosthetic prescriptions received by a major dental laboratory in 4 weeks were involved in a quality audit, and the prescriptions were divided into three groups in accordance with the grades of clients. The filling of prosthetic prescriptions was recorded. The items in the prescriptions for audit included the general information of the patient, the general information of the clinician, the design diagram information, other detailed information, and the return date. The prescriptions were categorized into four levels on the basis of their quality by two quality inspectors who have been working for more than 10 years. RESULTS: A total of 916 prescriptions were collected and assessed. The names in the general information of the patient and the clinician were filled out best, both at the rate of 97.6% (n=894). The return date was filled out worst, only at the rate of 6.4% (n=59). Of those prescriptions, 86.8% (n=795) exhibited inadequate design diagram information. The results of the quality assessment demonstrated that 74.2% of prescriptions were assessed as noncompliant ones and failed to meet the acceptable clinical quality standard. CONCLUSIONS: At present, the overall quality of RPD prosthetic prescriptions is poor. The responsibilities of clinicians and technicians are unclear, and the communication between them is not ideal.

Protocolo Abreviado Guiado Digital: Técnicas de Marcadores Tisulares, Silicona de Registro y CBCT con Sonrisa / Digitally Guided Abbreviated Protocol: Tissue Marker Techniques, Recording Silicone and CBCT with Smile

Establecer un protocolo de cirugía guiada estática con técnicas referenciales para ser realizado de manera predecible, repetible y simple, en todos los tipos de casos. El protocolo abreviado guiado digital para cirugía guiada estática para implantes se centra en diseñar computacionalmente una guía quirúrgica que se apoye en el tejido remanente del paciente, siendo un protocolo digital versátil para la cirugía y rehabilitación implanto protésica, basada en registros clínicos, principalmente la línea de la sonrisa y la captación de ésta en tomografía de haz cónico (CBCT), además de establecer dimensión vertical oclusal (DVO). Logrando así, planificación de implantes hasta la inserción inmediata de la prótesis temporal. Se ejemplifica el trabajo con 2 casos clínicos. Se establece un protocolo con la intención de que pueda ser realizado en pacientes desdentados parciales (Técnica de Registro Silicona) o totales (Técnica de Marcadores Tisulares en prótesis), definiendo un flujo de trabajo tridimensional, digital y optimizado, con un consecuente ahorro de tiempo clínico. Como principio del protocolo de cirugía guiada es lograr el objetivo quirúrgico - protésico deseado con alta precisión. La cirugía y rehabilitación de implantes de manera convencional es altamente dependiente del operador por lo que la alternativa de cirugía guiada de manera estática es una herramienta más para mejorar el pronóstico del paciente. Se establece un protocolo digital simple y efectivo, de cirugía guiada, para la rehabilitación implanto protésica basada en la línea de la sonrisa, tomografía de haz cónico (CBCT), dimensión vertical oclusal (DVO). Protocolo predecible y que optimiza los tiempos clínicos, logrando una rehabilitación protésica inmediata acorde e individualizada para cada paciente.

Establish a static guided surgery protocol with referential techniques to be performed in a predictable, repeatable and simple way, in all types of cases. The abbreviated digital guided protocol for static guided surgery for implants focuses on computationally designing a surgical guide that rests on the patient's remaining tissue, being a versatile digital protocol for prosthetic implant surgery and rehabilitation, based on clinical records, mainly the line of the smile and its uptake in cone beam tomography (CBCT), in addition to establishing occlusal vertical dimension (OVD). Thus achieving implant planning until the immediate insertion of the temporary prosthesis. The work is exemplified with 2 clinical cases. A protocol is established with the intention that it can be carried out in partially edentulous patients (Silicone Registration Technique) or total (Tissue Marker Technique in prostheses), defining a three-dimensional, digital and optimized workflow, with a consequent saving of time. clinical. As a principle of the guided surgery protocol, it is to achieve the desired surgical-prosthetic objective with high precision. Conventional implant surgery and rehabilitation is highly dependent on the operator, so the alternative of statically guided surgery is one more tool to improve the patient's prognosis. A simple and effective digital protocol for guided surgery is established for prosthetic implant rehabilitation based on the smile line, cone beam tomography (CBCT), and occlusal vertical dimension (OVD). Predictable protocol that optimizes clinical times, achieving an immediate and individualized prosthetic rehabilitation for each patient.

Fracture resistance of 3-unit monolithic ZrO2 ceramics FPDs with different preparation designs of the distal abutment - an in-vitro study.

INTRODUCTION: Masticatory pressure increases in the distal areas of the dentition. This should be considered when restoring partially edentulous patients with a metal-free fixed partial denture (FPD). An alternative abutment preparation design can be used in order to increase the materials' volume in the most fracture-prone "connector area" of an FPD. The increased size of the connection might positively influence the constructions' mechanical durability, thereby increasing its success and survivability. AIM: The aim of the present study was to investigate the influence of two preparation designs of the distal abutment on the fracture resistance of three-unit, monolithic, ZrO2 FPDs. MATERIALS AND METHODS: 3D printed replicas of a partially edentulous mandibular segment and a ZrO2, milled in full-contour, three-unit FPDs were used for this investigation. Two experimental groups (n=10 ) were defined based on the preparation design of the distal abutment tooth - classical shoulder preparation 0.8 mm deep, and endocrown preparation with a 2-mm retention cavity. The bridge - mandibular segment replica assembly was done with relyXU200(3M ESPE, USA), light-cured for 10 seconds per side with D-light Duo (GC, Europe). After cementation the test specimens were subjected to loading in a universal testing machine Zwick (Zwick-Roell Group, Germany). Statistical analysis was performed using R and includes descriptive statistics, t-test for quantitative and chi-squared test for qualitative variables. RESULTS: The results showed no difference between the two studied groups in the maximum force required to fracture the test specimens [t=-1.8088 (17.39), p-value=0.087; P>0.05]. 95% of the fracture lines were located in the distal connector. CONCLUSIONS: Within the limitations of this study, it can be concluded that both tested preparation designs show similar results in terms of the load required to fracture the test specimens. Furthermore, it is confirmed that the distal connector is the weakest area of an all-ceramic 3-unit FPD in the posterior area.

Digital duplication of maxillary complete denture: A dental technique.

OBJECTIVE: This technique aims to construct a virtual, well-adapted maxillary denture from an existing, ill-fitting denture in completely edentulous patients. CLINICAL CONSIDERATIONS: A functional impression is made using the loose maxillary denture, and a cone beam computed tomography (CBCT) of the entire old denture is carried out. The obtained digital imaging and communication in medicine (DICOM) file was segmented using an image computing platform software (3D slicer). The resultant Standard Tessellation Language (STL) file was 3D printed in porcelain white-like resin, then colored and characterized. CONCLUSIONS: The technique introduces a high-quality digital denture replicate with good retention, that can replace the traditional duplication technique. It can also be used as a relining method for old dentures. This proposed digital technique reduces the number of clinical appointments while also providing a digital library for future denture manufacture. CLINICAL SIGNIFICANCE: The proposed technique offers a high-quality digital denture replicate that can replace the traditional duplication technique. This digital technique also reduces the number of clinical appointments required for denture duplication.

Managing Fibrous Maxillary Ridge: A Case Series of Impression Techniques.

Fibrous ridges on the edentulous maxillary arch are commonly found in combination syndrome or due to ill-fitting dentures. Often, these cases are managed conservatively using modified impression techniques to achieve better support and peripheral seal without displacing the movable tissue. Many impression techniques were proposed and justified with their respective ideologies, but some may complicate both the clinical and laboratory procedures. In this report, two simplified techniques are demonstrated to make an impression of the maxillary arch with fibrous ridges. Laboratory steps in custom tray fabrication are also emphasised for a successful and predictable impression.

Digital optimization of teeth setup in an edentulous patient with partial glossectomy: A case report.

The purpose of this clinical report was to describe the use of a piezographic impression associated with computer-aided design and computer-aided manufacturing (CAD-CAM) for teeth setup and of digital tools for neuro-musculo-kinetic analyses. An edentulous patient with hemiglossectomy and heavily resorbed mandible consulted for complete denture rehabilitation to improve their masticatory function and speech. Master casts, wax rims, and piezographic impression were scanned for digital prosthetic work. Two digital try-ins were performed to respect the neutral zone: try-in 1 with posterior crossbite and try-in 2 without crossbite. Muscle activity and mandibular kinetics were performed for each try-in following the MAC2 protocol (six criteria): muscular tone, contraction synchrony, contraction efficiency, interocclusal rest distance, amplitude of mandibular movement, and velocity. Try-in 2 showed better data than try-in 1 in all criteria: muscle tone (respectively 71% vs. 59%), contraction synchrony (79% vs. 75%), contraction efficiency (85% vs. 77%), an increase in range of motion of 3.3 mm, and a better velocity (0.35 ± 0.12 s vs. 0.57 ± 0.14 s, p = 0.008). The piezographic impression, in combination with CAD-CAM, allowed the comparison of two prosthetic designs and the selection of the try-in with the best neuro-musculo-kinetic results.

Effect of mandibular bilateral distal extension denture design on masticatory performance.

PURPOSE: Removable partial dentures have a wide range of applications as missing tooth prostheses, and the denture design can be quite diverse. However, the factors affecting masticatory function remain unclear. We investigated the effect of denture design, especially the use of indirect retainers and major connectors, on masticatory function in patients with mandibular bilateral distal extension dentures. METHODS: Fifty-three patients with mandibular Kennedy Class I and Eichner classification B occlusal support were included in this study. Masticatory performance (MP) was assessed using gummy jelly. For the dentures, the type of major connector (bar or apron), presence or absence of indirect retainers, number of rests, and number of artificial teeth were evaluated. The number of functional teeth and occlusal support, Eichner classification, maxillary denture usage, mandibular residual ridge height, and duration of denture use were also evaluated. The factors influencing on the MP were evaluated using the Mann-Whitney U test, Spearman's correlation coefficient, and logistic regression analysis. RESULTS: MP was significantly higher when the major connector was bar-type or when there was an indirect retainer than with an apron-type or no indirect retainer. MP was positively correlated with the number of functional teeth, occlusal support, and number of rests. Logistic regression analysis revealed that the number of functional teeth and the presence or absence of an indirect retainer were factors that significantly influenced the MP. CONCLUSIONS: An indirect retainer setting is useful for achieving good masticatory performance in mandibular bilateral distal extension dentures.

Perio-prosthodontic pontic site management, part I: Pontic designs and their current applications.

OBJECTIVE: Emulating natural dentition with dental implant restorations is challenging, increasing its complexity when a pontic area must be restored. Many different methods have been described to solve this problem. The pontic designs which have been proposed have specific indications and may require additional treatments, including soft tissue augmentation procedures, to increase the possibility of an esthetically pleasing and biologically tolerable outcome. Proper conditioning of the soft tissues during the interim restoration stage and adequate communication with the laboratory are also critical factors to a successful outcome. This article describes the different approaches to restoring pontic sites with different degrees of complexity, their clinical indications, and limitations viewed from a perio-prosthodontic approach. CLINICAL CONSIDERATIONS: Different clinical scenarios for pontic sites require different approaches. Missing hard and soft tissues can be replaced by surgical or prosthetic means. Understanding the clinical indications and implications of the different pontic designs allows the clinician to make good decisions when planning and treating patients that require replacement of pontic spaces leading to more successful outcomes. CONCLUSIONS: Different pontic designs have specific indications as well as biologic and esthetic prognoses. Selection of a good design, proper modifications during the provisionalization stage, and adequate communication with the dental laboratory will lead to higher chances of esthetic and biological success. CLINICAL SIGNIFICANCE: The proper pontic design allows for esthetically pleasing pontic sites which emulate natural emergence from the soft tissues while promoting biological stability.

An in vitro trial on the effect of arch form on connector size requirements in long span anterior zirconia fixed dental prostheses.

PURPOSE: To test the fracture resistance of maxillary canine to canine fixed partial denture with four missing incisors, with increasing anterior-cantilevers of the pontics and varying connector sizes. MATERIALS AND METHODS: Two 3D-printed titanium alloy (Ti6Al4V) models mimicking a maxillary canine to canine fixed partial denture (FPD) with four pontics replacing the incisors were used as master models. Zirconia FPDs were digitally designed and milled with two different connector sizes (9 and 12 mm2 ) each with three different anterior cantilevers (7, 10, and 13 mm) accounting for 6 test groups. Seven samples were milled for each group generating a total of 42 samples. The zirconia FPDs were cemented on the titanium model using resin modified glass ionomer cement and the model fixated to a variable angle vice. A sinusoidal cyclic waveform load from 50 to 280N was applied using a universal testing machine at a frequency of 30 cycles per second and a total of 5 million cycles. RESULTS: The results of Fisher's exact tests showed that the difference in the proportion of fractured versus nonfractured fixed partial dentures was not statistically significant when comparing the 9 with the 12 mm2 connector size (p = 1.00), as well as when comparing the six test groups (p = 0.2338); on the other hand, it proved to be statistically significant when comparing the 7 mm cantilever with the 10 and 13 mm cantilevers combined (p = 0.0407) indicating that a 7 mm anterior spread of the pontics showed a significantly greater proportion of fixed partial dentures that fractured. CONCLUSIONS: Fracture susceptibility was not a function of cantilever length in this testing configuration for anterior FPDs. Retainer crown thickness seems to be a more important parameter than connector size thickness. Based on the results, a smaller connector size (9 mm2 ) can be used to improve the esthetics of pontics in long span anterior FPDs.